| Inductive NAMUR Sensors |
|
NAMUR inductive sensors can be used for sensing or distance measurement even in dangerous explosive environments. These sensors change resistance when the target is present. All except 6.5 mm diameter have a threaded body. Amplifiers are available separately. |
| Diameter | Sensing Distance |
Power Supply |
Operating Frequency |
Flush Mount |
Termination |
|---|---|---|---|---|---|
| 6.5 mm | 1.0 mm | 5.0-24 VDC | 2.0 kHz | Yes | Cable - 0 |
| Connector - 8 | |||||
| 2.0 mm | No | Cable - 0 | |||
| Connector - 8 | |||||
| 8.0 mm | 1.0 mm | 5.0-24 VDC | 2.0 kHz | Yes | Cable - 0 |
| Connector - 8 | |||||
| 2.0 mm | No | Cable - 0 | |||
| Connector - 8 | |||||
| 12 mm | 2.0 mm | 5.0-24 VDC | 2.0 kHz | Yes | Cable - 0 |
| Connector - 8 | |||||
| 4.0 mm | No | Cable - 0 | |||
| Connector - 8 | |||||
| 18 mm | 5.0 mm | 5.0-24 VDC | 1.0 kHz | Yes | Cable - 0 |
| Connector - 8 | |||||
| 8.0 mm | No | Cable - 0 | |||
| Connector - 8 | |||||
| 30 mm | 10 mm | 5.0-24 VDC | 500 Hz | Yes | Cable - 0 |
| Connector - 8 | |||||
| 15 mm | No | Cable - 0 | |||
| Connector - 8 |
| Ordering Information |
| T | ____ | - | D | N | __ | __ | - | F | |
| Termination : 0 - cable 8 - connector |
|||||||||
| Mounting : 1 - flush 6 - non-flush |
|||||||||
| N - NAMUR | |||||||||
| D - DC power supply | |||||||||
| Body diameter : 06 - 6.5 mm 08 - 8.0 mm 12 - 12 mm etc... |
|||||||||
| T - tubular | |||||||||
| ISSC/Kanson Electronics Home |
ISSC Products |
| ISSC Sensors |
Sensor Info |
| DC tubular |
DC limit and blocks |
DC high temp |
Linear sensors |
DC ring sensors |
DC Weld field immune |
NAMUR |
|
Buy factory direct with your credit card. Call (800) 233-9354 or (931) 796-3050. Fax (931) 796-3956  Kanson Electronics info@Issc-Kanson.com
|
Last updated : October, 2003
Copyright © Kanson Electronics, Inc. 1997, 2003