orange issc logo
 Tubular Inductive AC Sensors

DC tubular sensors are available in body diameters from 12 mm to 30 mm. Housings are threaded for all models. Most models are available with cable or connector output connections. Output configuration is two wire in both normally open and normally closed configurations. All models are CE rated with an operating temperature range of -25C to +70C, environmental rating is IP67.

Diameter Sensing
Distance		 Power
Supply		 Switching
Current		 Output Operating
Frequency		 Flush
Mount		 Termination Notes
12 mm 2.0 mm 20-250 VAC 300 mA 1,2 12 Hz Yes Cable - 0
4.0 mm No
2.0 mm Yes Conn - 8
4.0 mm No
4.0 mm 40-250 VAC 180 mA 1 50 Hz No Cable - 0 1
18 mm 10 mm 20-250 VAC 300 mA 1,2 12 Hz Yes Cable - 0
15 mm No
5.0 mm Yes Conn - 8
8.0 mm No
30 mm 10 mm 20-250 VAC 300 mA 1,2 12 Hz Yes Cable - 0
15 mm No
10 mm Yes Conn - 8
15 mm No

Output:
1. normally open
2. normally closed

Notes:
1. threaded plastic body


Ordering Information
__ T ____ - A __ __ __ - F








Terminations :
0 - cable
8 - 3 pin connector







Mounting :
1 - flush
6 - non-flush






Output :
1 - normally open
2 - normally closed





A - AC power supply



Body diameter :
12 - 12 mm
18 - 18 mm
30 - 30 mm


T - tubular

blank except :
P - plastic body

| ISSC/Kanson Electronics Home | ISSC Products |
| ISSC Sensors | Sensor Info |
| AC tubular | AC limit and blocks | AC Weld field immune |

credit cards credit cards credit cards credit cards Buy factory direct with your credit card.
Call (800) 233-9354 or (931) 796-3050.
Fax (931) 796-3956
email ISSC Kanson Electronics info@Issc-Kanson.com

Last updated : October, 2003
Copyright © Kanson Electronics, Inc. 1997, 2003