orange issc logo
 Weld Immune AC Sensors

The main characteristic of this series is the immunity to noise induced by alternating magnetic fields. The magnetic flux density can reach 150 millitesla, equivalent to a 20 kA welding current flowing 2.5 cm from the sensor. LED function indicator. Short circuit and reverse polarity protection are standard. Teflon plated brass housing.

Diameter Sensing
Distance		 Power
Supply		 Switching
Current		 Output Operating
Frequency		 Flush
Mount		 Termination
12 mm 2.0 mm 20-250 VDC 300 mA N.O. - 1 15 Hz Yes Cable - 0
4.0 mm No
2.0 mm Yes Conn - 8
4.0 mm No
2.0 mm N.C. - 2 Yes Cable - 0
4.0 mm No
2.0 mm Yes Conn - 8
4.0 mm No
18 mm 5.0 mm 20-250 VDC 500 mA N.O. - 1 15 Hz Yes Cable - 0
8.0 mm No
5.0 mm Yes Conn - 8
8.0 mm No
5.0 mm N.C. - 2 Yes Cable - 0
8.0 mm No
5.0 mm Yes Conn - 8
8.0 mm No
30 mm 10 mm 20-250 VDC 500 mA N.O. - 1 15 Hz Yes Cable - 0
15 mm No
10 mm Yes Conn - 8
15 mm No
10 mm N.C. - 2 Yes Cable - 0
15 mm No
10 mm Yes Conn - 8
15 mm No
Ordering Information
W T ____ - A __ __ __ - F








Terminations :
0 - cable
8 - 3 pin connector







Mounting :
1 - flush
6 - non-flush






Output :
1 - normally open
2 - normally closed





A - AC power supply



Body diameter :
12 - 12 mm
18 - 18 mm
30 - 30 mm


T - tubular

W - weld immune

| ISSC/Kanson Electronics Home | ISSC Products |
| ISSC Sensors | Sensor Info |
| AC tubular | AC limit and blocks | AC Weld field immune |

credit cards credit cards credit cards credit cards Buy factory direct with your credit card.
Call (800) 233-9354 or (931) 796-3050.
Fax (931) 796-3956
email ISSC Kanson Electronics info@Issc-Kanson.com

Last updated : October, 2003
Copyright © Kanson Electronics, Inc. 1997, 2003