orange issc logo
 Limit Switch, Block and Rectangular Inductive DC Sensors

Inductive DC sensors in limit switch, block and rectangular type housings. A wide variety of output options and termination styles are available. See individual data sheets for dimensions and output configurations. The 1248A includes built-in motion detector timer circuitry.

Type and
Dimensions
(mm)		 Sensing
Distance		 Power
Supply		 Switching
Current		 Output Operating
Frequency		 Flush
Mount		 Termination Notes
Limit switch
40 X 40 X 113		 15 mm 10-55 VDC 200 mA 0,7 300 Hz Yes Term. block
0		 1
20 mm No
15 mm 10-30 VDC 100 mA P 300 Hz Yes
20 mm No
12.7 mm 10-40 VDC 100 mA PNP, NC 150 Hz No Term. block 2
14.3 mm 10-26 VDC NPN, NO 1.0 kHz No Term. block 3
12.7 mm 20-250
VAC/DC		 500 mA NO or NC 166 Hz No Term. block
or
Connector		 4
NO 5-7500
pulses/min		 No Connector 5
Block
80 X 80 X 50		 10-60 mm 10-55 VDC 200 mA 0,7 50 Hz No Connector
4
10-30 VDC 100 mA P
Rectangular
17.5 X 17.5 X 28.5		 4.0 mm 10-30 VDC 100 mA 3,4,5,6 500 Hz No Cable - 0
Rectangular
12 X 26 X 40		 2.0 mm 10-30 VDC 200 mA 0,7 500 Hz Yes Cable - 0
4.0 mm No
Rectangular
8.0 X 8.0 X 40		 2.0 mm 10-30 VDC 200 mA 3,4,5,6 2.0 kHz Yes Cable - 0
4.0 mm Connector - 3
Rectangular
10.2 X 16 X 28		 2.0 mm 10-30 VDC 200 mA 3,4,5,6 1.0 kHz Yes Cable - 0
4.0 mm Connector - 3

Notes:
1. sensing head can be oriented in 5 directions
2. available end, right or left sensing, use 1217P ordering information.
3. end sensing only, use 1221 ordering information.
4. available end, right or left sensing, use 1250 ordering information.
5. built-in motion detector, end sensing only, use 1248A ordering information.

Ordering Information
L ____ - D __ __ __ - F








Terminations :
0 - cable
3 - 3 pin miniature connector
4 - right angle connector
8 - 3 pin connector






Mounting :
1 - flush
6 - non-flush





Output :
0 - NPN complementary
3 - NPN, normally open
4 - PNP, normally open
5 - NPN, normally closed
6 - PNP, normally closed
7 - PNP complementary




D - DC power supply


Size :
08 - 8.0 mm
10 - 10.2 mm
12 - 12 mm
17 - 17.5 mm
40 - 40 mm
80 - 80 mm

L - Limit, block or rectangular
1217P Ordering Information
1217P - __





Sensing direction :
1 - end
2 - right side
3 - left side

1217P - Limit style, DC supply, PNP - NC output
1221 Ordering Information
1221 - 1 - A - 1 - A
1221 - Limit style, DC supply, end sensing, NPN - NC output
1248A Ordering Information
1248A-1A4P
1248A - Limit style, universal supply, end sensing, NO output, motion detetector with start-up delay
1250 Ordering Information
1250 - __ - __ - __









Sensing direction :
1 - end
2 - right side
3 - left side








Terminations :
1 - terminal block
2 - connector



Output :
A - normally open
B - normally closed

1250 - Limit style, universal supply

| ISSC/Kanson Electronics Home | ISSC Products |
| ISSC Sensors | Sensor Info |
| DC tubular | DC limit and blocks | DC high temp | Linear sensors | DC ring sensors | DC Weld field immune | NAMUR |

credit cards credit cards credit cards credit cards Buy factory direct with your credit card.
Call (800) 233-9354 or (931) 796-3050.
Fax (931) 796-3956
email ISSC Kanson Electronics info@Issc-Kanson.com

Last updated : October, 2003
Copyright © Kanson Electronics, Inc. 1997, 2003