orange issc logo
 Tubular Inductive DC Sensors

DC tubular sensors are available in body diameters from 4.0 mm to 30 mm. Housings are threaded for all except 4.0 mm and 6.5 mm sizes. Most models are available with cable or connector output connections. Output configurations include NPN and PNP in both normally open and normally closed configurations, a complemantary configuration is also offered. Two wire models are also available in both normally open or normally closed versions. Most models are CE rated with an operaation temperature range of -25C to +70C, environmental rating is IP67.

Diameter Sensing
Distance		 Power
Supply		 Switching
Current		 Output Operating
Frequency		 Flush
Mount		 Termination Notes
4.0 mm 0.8 mm 10-30 VDC 150 mA 3,4,5,6 3.0 kHz Yes Cable - 0 1
5.0 mm 0.8 mm 10-30 VDC 150 mA 3,4 3.0 kHz Yes Cable - 0
3,4,5,6 Conn - 3
6.5 mm 2.0 mm 10-30 VDC 200 mA 3,4,5,6 2.0 kHz Yes Cable - 0 1,2
Conn - 3
8.0 mm 1.0 mm 10-30 VDC 200 mA 3,4 2.0 kHz Yes Cable - 0
2.0 mm No
1.0 mm 3,4,5,6 Yes Conn - 8
2.0 mm No
1.5 mm 5-30 VDC 1.0 kHz Yes Cable - 0 3
3.0 mm No
1.5 mm Yes Conn - 8
3.0 mm No
2.0 mm 10-30 VDC 3,4 2.0 kHz Yes Cable - 0 2
3,4,5,6 Conn - 8
12 mm 2.0 mm 10-30 VDC 200 mA 0,3,4,7 2.0 kHz Yes Cable - 0
4.0 mm No
2.0 mm 0,3,4,5,6,7 Yes Conn - 8
4.0 mm No
3.0 mm 5-30 VDC 3,4,5,6 1.0 kHz Yes Cable - 0 3
5.0 mm No
3.0 mm Yes Conn - 8
5.0 mm No
2.0 mm 150 mA 3 2.0 kHz Yes Cable - 0 4
4.0 mm 1.0 kHz No Conn - 8
4.0 mm 10-30 VDC 200 mA 3,4 1.0 kHz Yes Cable - 0 2
3,4,5,6 Conn - 8
2.0 mm 100 mA 8,9 Yes Cable - 0
4.0 mm No
2.0 mm Yes Conn - 8
4.0 mm No
18 mm 5.0 mm 10-30 VDC 150 mA 0,3,4,7 1.0 kHz Yes Cable - 0
8.0 mm 500 Hz No
5.0 mm 200 mA 0,3,4,5,6,7 1.0 kHz Yes Conn - 8
8.0 mm No
8.0 mm 3,4,5,6 200 Hz Yes Cable - 0 2
Conn - 8
5.0 mm 100 mA 8,9 600 Hz Yes Cable - 0
8.0 mm No
5.0 mm Yes Conn - 8
8.0 mm No
30 mm 10 mm 10-30 VDC 150 mA 0,3,4,7 300 kHz Yes Cable - 0
15 mm 150 Hz No
10 mm 200 mA 0,3,4,5,6,7 300 Hz Yes Conn - 8
15 mm No
15 mm 3,4,5,6 200 Hz Yes Cable - 0 2
Conn - 8
10 mm 100 mA 8,9 300 Hz Yes Cable - 0
15 mm No
10 mm Yes Conn - 8
15 mm No

Output:
0. NPN, complementary
3. NPN, normally open
4. NPN, normally closed
5. PNP, nomally open


6. PNP, normally closed
7. PNP, complementary
8. two wire, normally open
9. two wire, normally closed

Notes:
1. unthreaded stainless steel body
2. extended operating distance
3. short body
4. TTL compatible

Ordering Information
__ T ____ - D __ __ __ __ - F









blank except :
S for Short body types








Terminations :
0 - cable
3 - 3 pin miniature connector
8 - 3 pin connector







Mounting :
1 - flush
6 - non-flush






Output :
see table





D - DC power supply



Body diameter :
05 - 5.0 mm
06 - 6.5 mm
12 - 12 mm
etc...


T - tubular

blank except :
X - extended sensing distance
T - TTL compatable

| ISSC/Kanson Electronics Home | ISSC Products |
| ISSC Sensors | Sensor Info |
| DC tubular | DC limit and blocks | DC high temp | Linear sensors | DC ring sensors | DC Weld field immune | NAMUR |

credit cards credit cards credit cards credit cards Buy factory direct with your credit card.
Call (800) 233-9354 or (931) 796-3050.
Fax (931) 796-3956
email ISSC Kanson Electronics info@Issc-Kanson.com

Last updated : October, 2003
Copyright © Kanson Electronics, Inc. 1997, 2003