| Weld Immune DC Sensors |
|
The main characteristic of this series is the immunity to noise induced by alternating magnetic fields. The magnetic flux density can reach 150 millitesla, equivalent to a 20 kA welding current flowing 2.5 cm from the sensor. LED function indicator. Short circuit and reverse polarity protection are standard. Teflon plated brass housing. |
| Diameter | Sensing Distance |
Power Supply |
Switching Current |
Operating Frequency |
Flush Mount |
Termination |
|---|---|---|---|---|---|---|
| 12 mm | 2.0 mm | 10-30 VDC | 200 mA | 15 Hz | Yes | Cable - 0 |
| 4.0 mm | No | |||||
| 2.0 mm | Yes | Conn - 8 | ||||
| 4.0 mm | No | |||||
| 18 mm | 5.0 mm | 10-30 VDC | 200 mA | 15 Hz | Yes | Cable - 0 |
| 8.0 mm | No | |||||
| 5.0 mm | Yes | Conn - 8 | ||||
| 8.0 mm | No | |||||
| 30 mm | 10 mm | 10-30 VDC | 200 mA | 15 Hz | Yes | Cable - 0 |
| 15 mm | No | |||||
| 10 mm | Yes | Conn - 8 | ||||
| 15 mm | No |
| Ordering Information |
| W | T | ____ | - | D | 4 | __ | __ | - | F | |
| Terminations : 0 - cable 8 - 3 pin connector |
||||||||||
| Mounting : 1 - flush 6 - non-flush |
||||||||||
| 4 - PNP normaly open | ||||||||||
| D - DC power supply | ||||||||||
| Body diameter : 12 - 12 mm 18 - 18 mm 30 - 30 mm |
||||||||||
| T - tubular | ||||||||||
| W - weld immune | ||||||||||
| ISSC/Kanson Electronics Home |
ISSC Products |
| ISSC Sensors |
Sensor Info |
| DC tubular |
DC limit and blocks |
DC high temp |
Linear sensors |
DC ring sensors |
DC Weld field immune |
NAMUR |
|
Buy factory direct with your credit card. Call (800) 233-9354 or (931) 796-3050. Fax (931) 796-3956  Kanson Electronics info@Issc-Kanson.com
|
Last updated : October, 2003
Copyright © Kanson Electronics, Inc. 1997, 2003